How To Install A GPI M30 Mechanical Fuel Meter and Filter Kit Installation To A G20 Fuel Transfer Pump

M30 Fuel Meter + GPI Fuel Filter Kit + GPI G20 Fuel Transfer Pump = Easy install process

Have a GPI G20 Fuel Transfer Pump, an M30 Fuel Meter and a GPI Fuel Filter Kit? Here is how to install them together.

Installing a M30 Fuel Meter and a GPI Filter Kit on a G20 Fuel Transfer Pump

Add thread tape to all threaded parts of the pump, hoses, suction pipes and adapters.
Tightly install the included bung adapter on the fuel tank
Install the gasket and suction pipe on the pump
Extend the suction pipe to its full length
Install the pump on the bung adapter
Tighten down the spin collar
Attach the nozzle holder to the back of the pump using a 4 mm hex wrench
Install the o-ring to the pump outlet
Install the quick fit filter adapter to the pump outlet using a 5 mm hex wrench
Install the fuel filter and o-ring onto the filter adapter
Attach the M30 Meter to the outlet port of the filter adapter with a 10 mm crescent wrench
Attach the hose to the hose adapter
Install the o-ring and hose adapter onto the outlet port of the M30 meter with a 5 mm hex wrench
Tighten the hose into the adapter to prevent leaks and drips
Attach your nozzle to the hose