Adding a QM40 Fuel Meter and a Filter Kit in a simple step-by-step process.
We've listed out a step-by-step on how to install a GPI QM40 Fuel Meter and a GPI Filter Kit onto a GPRO V25 Fuel Transfer Pump. If you already have the pump installed, feel free to skip down to step 6.
Installing a GPRO V25 Fuel Transfer Pump with a QM40 Fuel Meter and GPI Filter Kit
- Add thread tape to all threaded parts of the pump, hoses, suction pipes and adapters.
- Install the included bung adapter on the suction pipe and extend suction pipe to its full length
- Tightly install the bung adapter on the fuel tank.
- Install the pump on the bung adapter
- Attach the nozzle holder to the pump using a 4 mm hex wrench
- Install an o-ring to the pump outlet
- Install the quick fit filter adapter to the pump outlet using a 5 mm hex wrench
- Install the fuel filter and o-ring onto the adapter
- Use a 10 mm crescent wrench to install the QM40 meter onto the adapter outlet port
- Attach the hose to the hose adapter
- Place an o-ring onto the outlet of the QM40 meter
- Install the hose adapter onto the QM40 meter with a 5 mm hex wrench
- Tighten the hose into the adapter to prevent leaks and drips
- Attach your nozzle to the hose
Offerings covered by this post:
GPI V25 12V Fuel Transfer Pump Only (25 GPM) – V25-012PO
GPI V25 12V Fuel Transfer Pump, 1″ Manual Nozzle, 18′ Hose & Tank Adapter Mount (25 GPM) – V25-012MD
GPI V25 12V Fuel Transfer Pump, 1″ Auto Nozzle, 18′ Hose & Tank Adapter Mount (25 GPM) – V25-012AD
GPI QM40 Mechanical Fuel Meter – QM40G8N