How to install NX25 Series Anti-Siphon Kit

WARNING: Relieve pump pressure and disconnect power before starting

Directions to Install NX25 Series Anti-Siphon Kit

Anti-Siphon Kit Installation

1. Remove port plug from bung adapter
2. Apply thread sealant to end of elbow
3. Install elbow into bund adapter
   1. Ensure this elbow is in upward position
4. Install braided hose onto elbow
   1. Use wrench to tighten hose
5. Apply thread sealant to end of second elbow and install
   1. Ensure this elbow is in downward position
6. Install other end of braided hose onto elbow
   1. Use wrench to tighten hose
7. A continuous downward slope on hose to ensure proper function