How To Install A GPI Filter Kit On A G20 Fuel Transfer Pump

Do these easy to follow steps to add GPI's filter kit to your GPI G20 fuel transfer pump

Install a GPI Filter Kit onto your GPI G20 Fuel Transfer Pump with this 14-step guide.

Installing a GPI Filter Kit on G20 Fuel Transfer Pumps

Add thread tape to all threaded parts of the pump, hoses, suction pipes and adapters.
Tightly install the included bung adapter on the fuel tank
Install the gasket and suction pipe on the pump
Extend the suction pipe to its full length
Install the pump on the bung adapter
Tighten down the spin collar
Attach the nozzle holder to the back of the pump using a 4 mm hex wrench
Install the o-ring to the pump outlet
Install the quick fit filter adapter to the pump outlet using a 5 mm hex wrench
Install the fuel filter and o-ring onto the adapter
Attach the hose to the hose adapter
Install the hose adapter onto the filter adapter with a 5 mm hex wrench
Tighten the hose into the adapter to prevent leaks and drips
Attach your nozzle to the hose